term% con -C /dev/eiaU12 � U-Boot 1.1.4 (Oct 1 2011 - 12:21:35) Cloud Engines 1.1.2 (3.4.27) PHYADDR=0 U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006918B4 Soc: 88F6192 A1 (DDR2) CPU running @ 800Mhz L2 running @ 400Mhz SysClock = 200Mhz , TClock = 166Mhz DRAM CAS Latency = 3 tRP = 3 tRAS = 8 tRCD=3 DRAM CS[0] base 0x00000000 size 128MB DRAM Total size 128MB 16bit width Addresses 8M - 0M are saved for the U-Boot usage. Mem malloc Initialization (8M - 7M): Done NAND:128 MB Flash: 0 kB CPU : Marvell Feroceon (Rev 1) CLOUD ENGINES BOARD: PPV4A1 Streaming disabled Write allocate disabled USB 0: host mode PEX 0: interface detected no Link. Net: egiga0 [PRIME] Hit any key to stop autoboot: 1 0 CE>> dhcp 0x800000 dhcp 0x800000 BOOTP broadcast 1 DHCP client bound to address 192.168.9.93 Using egiga0 device TFTP from server 192.168.9.65; our IP address is 192.168.9.93 Filename '/arm/9plug.OLD'. Load address: 0x800000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######### done Bytes transferred = 6699168 (6638a0 hex) CE>> tftp 0x1000 /cfg/pxe/00253105e367 tftp 0x1000 /cfg/pxe/00253105e367 Using egiga0 device TFTP from server 192.168.9.65; our IP address is 192.168.9.93 Filename '/cfg/pxe/00253105e367'. Load address: 0x1000 Loading: # done Bytes transferred = 133 (85 hex) CE>> go 0x800000 go 0x800000 ## Starting application at 0x00800000 ... Plan 9 from Bell Labs l1 D: 16384 bytes, 4 ways 128 sets 32 bytes/line; write-through only l1 I: 16384 bytes, 4 ways 128 sets 32 bytes/line; write-back type `reg 7 ops, format C' (016) possible l2 cache: 256K or 512K: 4 ways, 32-byte lines, write-back, sdram only cpu0: 1200MHz ARM Marvell 88F6281 A1; arm926ej-s arch v5te rev 2.1 part 131 #l0: 88e1116: 1000Mbps port 0xf1072000 irq 11: 00253105e367 #l1: ether1116: init mii failure 120Mspurious irqbridge interrupt: 00000010 memory: 18M kernel data, 102M user, 442M swap panic: boot process died: bad arg in system call ktrace /kernel/path 0x60806c7c 0x60e82764 0x6089cffc # pc, sp, link 0x60e82710=0x60806c78 0x60e82758=0x6083758c 0x60e8275c=0x60806c78 0x60e82760=0x60837a90 0x60e82768=0x6087374c 0x60e827b4=0x60891110 0x60e827c0=0x60890ecc 0x60e827d8=0x60891110 0x60e827e0=0x60890ffc 0x60e827e4=0x60890ecc 0x60e827ec=0x60890ecc 0x60e82818=0x60892e00 0x60e82830=0x608932a4 0x60e82850=0x60867380 0x60e8285c=0x60869f70 0x60e82864=0x60870b50 0x60e82870=0x608735a8 0x60e82888=0x6087f3d0 0x60e82894=0x6086ed7c 0x60e8289c=0x6086edf0 0x60e828bc=0x6087f370 0x60e8292c=0x608014ec 0x60e82934=0x60800cfc 0x60e82954=0x60807898 0x60e82960=0x608015b0 0x60e8296c=0x60800b30 0x60e8297c=0x60892e00 0x60e8298c=0x6086ddb0 0x60e82990=0x60872114 0x60e82994=0x608720a8 0x60e829b4=0x60872114 cpu0: exiting reset!